View Full Version : Blackhawk SERPA holster.....
ducman82
03-03-2009, 10:44 PM
Anyone know if the Blackhawk SERPA style holsters will work for a HK45c? they have lots of holsters listed for USP. i take it the newer style HK series will work with thouse?
Jake
Leutnant_Joker_26
03-03-2009, 11:18 PM
You need the one that is signed for P30. HK45 fits in, so HK45c should also do.
http://www.gearzoneproducts.com/index.asp?PageAction=VIEWPROD&ProdID=680
quikz
03-04-2009, 01:39 AM
ONLY the P30 Serpa CQC holsters (level 2 or non Serpa lock level 1) will fit the HK45 / 45C.
The other P30 Blackhawk is the Duty Holster or "Auto-Lock" holster that is Level 3. That one WILL NOT FIT ANY HK45's. Sadly....
HKONBOARD
03-04-2009, 04:46 AM
ONLY the P30 Serpa CQC holsters (level 2 or non Serpa lock level 1) will fit the HK45 / 45C.
The other P30 Blackhawk is the Duty Holster or "Auto-Lock" holster that is Level 3. That one WILL NOT FIT ANY HK45's. Sadly....
I want to buy a Serpa level 2 for my HK45C. When you say it "will fit" do you mean it go go in the holster. Or it will go in and lock as if it were made for it. It will fit in my sock but thats not ideal.
Thanks and forgive me for my thoroughness.
LCSO264
03-04-2009, 11:04 PM
It fits in and locks just fine. The full size HK45 protrudes out/past the bottom, but the holster works just fine. The HK45c fits perfectly.. You could also look on the HK webshop and get the holster they have there for the HK45/HK45c, it is essentially the same as the Serpa, but made by someone else (Fobus I think)....
Good luck
HKONBOARD
03-04-2009, 11:19 PM
As a matter of fact the HK webstore version was ordered and just shipped today. Since then I have heard some negatives about fobus and am exploring back up plans.
quikz
03-04-2009, 11:23 PM
The Hk in-hous HK45 full sz holster a good friend has. It is a paddle and is NOT as strong and built as the Blackhawk P30 CQC Serpa Level II's are.
Hk's in-hous holster also marred up the finish of my friend's HK45 full size MORE than even my P30 holster for my HK45C (but his does see ALOT of use). Also, my Blackhawk P30 level 2 CQC Serpa fit his full size HK45 slightly better than it fit my HK45C.
bshizzle
03-04-2009, 11:26 PM
Pass on Fobus and the Serpa - both are garbage
Go with raven concealment, comptac, bladetech, milt sparks, galco...etc etc
FalconSK
03-05-2009, 02:13 AM
I have the P30/45C serpa holster that came with the paddle and belt loop attachment. This holster fits both the P30 & 45C perfect. I am thinking of selling mine since it is now useless to me, I found out the hard way that the Heinie sights are too tall to allow holstering.
marshallwk
03-05-2009, 03:30 AM
Depends on what you need the holster for. Comp tech, blade tech etc are my first choice for IDPA/IPSC/civilian carry. If its for duty/military etc SERPA is ok, although safari land I think is personally better.
HKONBOARD
03-05-2009, 04:11 AM
I have the P30/45C serpa holster that came with the paddle and belt loop attachment. This holster fits both the P30 & 45C perfect. I am thinking of selling mine since it is now useless to me, I found out the hard way that the Heinie sights are too tall to allow holstering.
I'm interested. How much do you want for it?
vBulletin® v3.8.1, Copyright ©2000-2009, Jelsoft Enterprises Ltd.