P30 Bill Springfield Trigger Weight

[m98evolution]

Hey guys, I just got my P30 V3 back from Bill Springfield and it feels great! I do not have the means to measure the wieght of the trigger pull so I was just curious to see if anyone had the specs. Thanks in advance!

[Omega Man]

How would you describe the difference between the old V3 and the new trigger?

[Slim]

Hey guys, I just got my P30 V3 back from Bill Springfield and it feels great! I do not have the means to measure the wieght of the trigger pull so I was just curious to see if anyone had the specs. Thanks in advance!

Double action? Single action? Both? what got changed?
Thanks

[m98evolution]

Both DA and SA pulls have been lightened a hair and are really smooth. My wife can now fire the DA with one hand comfortably. The SA is where the difference is most noticable. The SA pull still has pre-travel but it is smooth and when you reach the breaking point it is really defined. At that breaking point there is no play in the trigger and futher movement will drop the hammer in a nice crisp break. It's tough to describe but the difference is noticable especially if you can try the stock trigger back-to-back with the "Bill Trigger." There's another thread I believe it's titled, "P30L Trigger" where the OP gives some good feedback as well. Hope that helped guys!

[Slim]

I found the other thread but I appreciate your personal response.

Thanks,

[kennywiz]

Both DA and SA pulls have been lightened a hair and are really smooth. My wife can now fire the DA with one hand comfortably. The SA is where the difference is most noticable. The SA pull still has pre-travel but it is smooth and when you reach the breaking point it is really defined. At that breaking point there is no play in the trigger and futher movement will drop the hammer in a nice crisp break. It's tough to describe but the difference is noticable especially if you can try the stock trigger back-to-back with the "Bill Trigger." There's another thread I believe it's titled, "P30L Trigger" where the OP gives some good feedback as well. Hope that helped guys!


+1!!!!

[jgedmond]

Both DA and SA pulls have been lightened a hair and are really smooth. My wife can now fire the DA with one hand comfortably. The SA is where the difference is most noticable. The SA pull still has pre-travel but it is smooth and when you reach the breaking point it is really defined. At that breaking point there is no play in the trigger and futher movement will drop the hammer in a nice crisp break. It's tough to describe but the difference is noticable especially if you can try the stock trigger back-to-back with the "Bill Trigger." There's another thread I believe it's titled, "P30L Trigger" where the OP gives some good feedback as well. Hope that helped guys!

Thanks for the report, sounds like a very worthwhile project. If you don't mind telling us - how many $? turnaround time?

[m98evolution]

Thanks for the report, sounds like a very worthwhile project. If you don't mind telling us - how many $? turnaround time?

It was $55. Door-to-door was less than one week. Bill works fast and you can check out his site at triggerwork.net