P9S Ejector

[8472]

Does anybody know if the ejector on the P9S.45 is the same as the P9S 9mm. I tried to check part numbers at Numrich parts, and they don't list one for the 9mm

[iwire]

Here is a link to the manual for the 9mm with part numbers. http://www.parkcitiestactical.com/manuals/P9S.pdf Give me a few days and I'll get my .45 out of storage and see if the manual for it has any part numbers.

[8472]

Thanks iwire,
I looked at your drawings and my .45 manual as you suggested, and it looks like the .45 has an ejector listed and the 9mm does not,that I don't understand.I don't have a 9mm to compare it to.
My resound for asking is that I was wondering if it is possible to put a 9mm slide on a .45 frame, (as the frames are suppose to be the same size) and useing a 9mm mag of coarse, to have one pistol with both calibers. I think the mag well is the same size also. My concern was with the ejector,it is held in the frame on my 45, if this would cause problems. Has anyone tried this?

[Landpimp]

it sorta will work but wont really. forget which way I did it, 45 frame with 9mm slide or visa versa but the slide catch was not in the correct spot but the gun fired......so in short no it wont.

Thanks iwire,
I looked at your drawings and my .45 manual as you suggested, and it looks like the .45 has an ejector listed and the 9mm does not,that I don't understand.I don't have a 9mm to compare it to.
My resound for asking is that I was wondering if it is possible to put a 9mm slide on a .45 frame, (as the frames are suppose to be the same size) and useing a 9mm mag of coarse, to have one pistol with both calibers. I think the mag well is the same size also. My concern was with the ejector,it is held in the frame on my 45, if this would cause problems. Has anyone tried this?

[co_front_ranger]

Nope, It won't work. The mags are different shapes. The 9mm mag flops around inside the 45 frame. The 45 mag won't fit in a 9mm frame. The ejector is shorter in the 45 due to the diameter of the 45 case. I fiddled with these combos and didn't see a way to be able to swap calibers. My goal was to use a 45 target frame with a 9mm slide.
So on the want list is a 9mm Target. Anyone wanna trade a 9mm Target model for a 45 Target ?

[Landpimp]

found my old post
http://hkpro.com/forum/showthread.php?t=49326&highlight=P9s

and yeah the 9mm targets seem to be hard to find compared to 45 targets

Nope, It won't work. The mags are different shapes. The 9mm mag flops around inside the 45 frame. The 45 mag won't fit in a 9mm frame. The ejector is shorter in the 45 due to the diameter of the 45 case. I fiddled with these combos and didn't see a way to be able to swap calibers. My goal was to use a 45 target frame with a 9mm slide.
So on the want list is a 9mm Target. Anyone wanna trade a 9mm Target model for a 45 Target ?