MP5 Ejectors - Page 2

JTinIN · 10-20-2009, 02:45 PM

Interesting discussion on 9mm ejectors. It almost appears that the MP5k ejector was "activated" a little earlier by the bolt, possible due to the higher cycle rate of the MP5k. Anyone have additional information, would be interested in a side discussion (ideally engineering notes and a software model ... but general tidbits are more than enough ;-).

This brings another set of variables into play, and may in a tiny part explain why some have issues with certain setups and other do not.

retrodog · 10-22-2009, 01:55 AM

I use the third generation version (got it from Adam) in my sear pack with my SW5, CA89 (both of them) and CA89K. It works perfectly in all of them. But I'm also using actual HK bolt assemblies in all these guns when using that ejector. In any case, I only change the ejector when I'm going to another caliber.

nhhk · 11-03-2009, 03:44 AM

I too was under the impression that the K and std ejectors were the same. Any chance of some pics of the different ones stacked up on each other?

wh · 11-03-2009, 08:44 PM

It would sure help for some one to take pics of all the ejector levers, old and new sorted by caliber and made into a sticky.

DAS · 11-05-2009, 03:51 PM

Quote:

Originally Posted by wh

It would sure help for some one to take pics of all the ejector levers, old and new sorted by caliber and made into a sticky.

+1

Dave

10-20-2009, 02:45 PM	#11
JTinIN Desperately Needs Treatment Join Date: Sep 2002 Location: Indiana Posts: 1,238	Interesting discussion on 9mm ejectors. It almost appears that the MP5k ejector was "activated" a little earlier by the bolt, possible due to the higher cycle rate of the MP5k. Anyone have additional information, would be interested in a side discussion (ideally engineering notes and a software model ... but general tidbits are more than enough ;-). This brings another set of variables into play, and may in a tiny part explain why some have issues with certain setups and other do not. __________________ Regards John Indiana State Submachine Gun Championship

10-22-2009, 01:55 AM	#12
retrodog Unrepentant HKHolic Join Date: Apr 2007 Location: Houston/Galveston TX Posts: 2,520	I use the third generation version (got it from Adam) in my sear pack with my SW5, CA89 (both of them) and CA89K. It works perfectly in all of them. But I'm also using actual HK bolt assemblies in all these guns when using that ejector. In any case, I only change the ejector when I'm going to another caliber. __________________ Global Market: Using a German designed Korean made mag, imported into the United states by an Italian, in an American made German designed gun with ammunition from the Czech Republic, to practice shooting Muslim terrorist targets that were printed in China. Insinsear: An HK type weapon without a auto sear.

11-03-2009, 08:44 PM	#14
wh Unrepentant HKHolic Join Date: Sep 2000 Posts: 2,225	It would sure help for some one to take pics of all the ejector levers, old and new sorted by caliber and made into a sticky. __________________ I long for the days of stamped HKs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FA MP5 Carrier - get MP5 or MP5k?	oliver28732	HK CLONE TALK	13	08-18-2009 11:02 PM
MP5 with supressor and subsonic VS MP5 SD	renrew	HK NFA TALK	27	08-14-2009 05:04 AM
mp5 to mp5k conversion questions	mslug94	HK LONG GUN TALK	2	03-17-2009 05:01 AM
How difficult is changing ejectors on MP5 packs?	insolution	HK ROOKIE CORNER	3	10-20-2008 02:01 PM
MP5 questions	ThreatNuetralized	HK LONG GUN TALK	15	04-04-2008 12:31 AM

11-03-2009, 03:44 AM	#13
nhhk Junior Member Join Date: Sep 2009 Posts: 36	I too was under the impression that the K and std ejectors were the same. Any chance of some pics of the different ones stacked up on each other?