HKPRO Forums
 

Go Back   HKPRO Forums > HKPRO INFORMATIONAL FORUMS > HK HANDGUN TALK
Register FAQ Members List Calendar Most Helpful Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 11-07-2009, 05:08 AM   #1
majette
Senior Member
 
majette's Avatar
 
Join Date: Feb 2007
Location: Norfolk, VA
Posts: 140
Default usp combat competition rear sight worked loose

was shooting my combat competition today and my first few shots were good, then i started hitting to the right - way right. i finished the mag, looked at the target and was puzzled. i then looked at the gun and the rear sight had drifted far to the right. it is the novak sight with an allen screw to keep it in place. should i use blue loc-tite on it and see how that does or should i send it in for repair?
majette is offline   Reply With Quote
Old 11-07-2009, 07:56 AM   #2
coto20
HKPRO PREMIUM PARTNER
 
Join Date: Mar 2007
Location: Wisconsin
Posts: 86
Default

Novak is a great company. I would send it in. They gave quick turn-a-round when I got their HK CC sights.Call them to discuss.
__________________
NRA
ATA

HK USPc .45 50th Anniversary
HK USPf 9mm w/ HK Compensator & HK competition scope rails. Roguard
(2) HK P7 PSP- Silver slides
Sig Sauer P229S Sport .357 Sig
coto20 is offline   Reply With Quote


Old 11-07-2009, 08:31 AM   #3
Lukas Koukal
HKPRO PREMIUM PARTNER
 
Lukas Koukal's Avatar
 
Join Date: Nov 2006
Location: Czech republic
Age: 24
Posts: 530
Send a message via ICQ to Lukas Koukal
Default

Hmm... comparing several days without the gun + paying for the postage against two minutes of Your own time to get it right? What kind of question is that?! Just drift it back, use some kind of thread locker and tighten it down where it belongs again. Job done
__________________
“Safety is something that happens between your ears, not something you hold in your hands.” Col. Jeff Cooper
Lukas Koukal is offline   Reply With Quote


Old 11-07-2009, 01:01 PM   #4
H&K 4 LIFE
HKPRO PREMIUM PARTNER
 
H&K 4 LIFE's Avatar
 
Join Date: Jul 2007
Location: CT
Posts: 2,167
Default

I would just re-align the sight and retighten the set screw until snug.

If it happens again then by all means call Novak. I can personally attest, excellent company.
__________________
JLD PTR-91
HK P7M8
HK P2000SK V2 .40 S&W
HK USP Combat Comp. V1 .40S&W
HK USP Compact V1 .40S&W

Glock 19 w/ Trijicons
Glock 26 w/ Trijicons

FN FNP-45 SS
H&K 4 LIFE is offline   Reply With Quote


Old 11-08-2009, 01:21 AM   #5
majette
Senior Member
 
majette's Avatar
 
Join Date: Feb 2007
Location: Norfolk, VA
Posts: 140
Default

used some blue loctite on the screw threads. appears to hold fine. i still cant get this usp down; group sizes are twice the size of anything else. in the past two days i have shot my steyrs, a sig p226 and p225, fn high power, and a nighhawk grp (awesome gun!) and i still have trouble with the usp, i guess because of the grip size. at 7 yds, one hole with the grp was the norm, other guns i grouped about 2", usp about 4". someone in the next lane commented on how well i shot the usp and i said it wasn't good enough. he said i see all of them in a group smaller than a fist, i think its good. i said i guess you are right but inside i was ticked off. i need to get better with the usp, especially to justify the coin i laid out for it.
majette is offline   Reply With Quote


Old 11-08-2009, 02:02 AM   #6
benderx4
Desperately Needs Treatment
 
benderx4's Avatar
 
Join Date: Aug 2008
Location: Orlando, FL
Posts: 1,324
Default

So this is the Combat Competition with the hybrid LEM/Match trigger set up - correct? If so, I'm assuming that the trigger is VERY different than all those other guns you shot, especially the single action Nighthawk.

I've found that when I shoot my HKs by themselves, I shoot SIGNIFICANTLY better than when I bring my Baer or Springer Custom along. Same thing, if I'm shooting a mixture of those guns, the 1911s will always outshine the HKs. At least for me, it's not automatic to immediately transition from the amazing triggers of John Browning to that of the HKs and vice versa.
__________________
Either lead, follow, or get out of the way!
benderx4 is offline   Reply With Quote


Old 11-08-2009, 04:01 AM   #7
majette
Senior Member
 
majette's Avatar
 
Join Date: Feb 2007
Location: Norfolk, VA
Posts: 140
Default

it is the hybrid match/lem trigger. my problem is a combination of trigger and grip. all of my other guns have smaller grips and/or are more ergonomic. i find myself changing the way i grip the usp constantly and the way my finger contacts the trigger changes. i think the accuracy is there as evidenced by an earlier pic i posted when i used the bench as a rest, 5yds at 10 rds:



but when i shot that group POA was dead center of the bullseye. i am better with the sights now but not consistent enough to try to use the usp in a competition and that is why i bought it in the first place. maybe after i run a thousand more rounds through it.
majette is offline   Reply With Quote


Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PTR91 Rear Sight Removal Naturil HK CLONE TALK 0 10-18-2009 04:19 PM
PTR91 Rear Sight Naturil HK LONG GUN TALK 0 10-18-2009 03:52 PM
USP Combat Competition Accuracy Update j28s HK HANDGUN TALK 1 09-25-2009 05:02 PM
can't get new front sight into USP 45 dovetail Gendaito HK HANDGUN TALK 6 11-29-2007 01:02 AM
G3 Rear Sight Wobble Rocketfish HK LONG GUN TALK 3 11-15-2007 12:34 AM


All times are GMT. The time now is 10:41 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
HKPRO.COM LLC 2009Ad Management by RedTyger

no new posts